Produkt Information
Navilock nl-8004u usb 2.0 Multi gnss receiver, u-blox 8, 4,5m cable length, ip7x, black, the usb 2.0 Multi gnss receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. You can use this gnss receiver with a laptop and a suitable routing software for navigation. The nl-8004u gnss receiver can be installed onto different vehicle roofs car, truck, bus etc. By using the included installation material. Thus it can perfectly fit into the vehicle concept, due to its design. Specification, connector: usb 2.0 Type-a male, chipset: u-blox 8 ubx-m8030-kt, frequency: gps: l1, 1575.4200 Mhz, glonass: l1, 1602 k x 0,5625 mhz, beidou compass: b1, 1561.0980 Mhz, galileo e1, 1575.4200 Mhz, qzss l1, 1575.4200 Mhz, accepts the signals of up to 72 satellites at the same time, supports assistnow online offline, sbas waas, egnos, qzss and msas , supports nmea 0183 protocols: gga, gsa, gsv, rmc, vtg, auto baud rate up to 115200 bps, update rate: single gnss: 18 hz e.G. Gps solo , multi gnss: 10 hz e.G. Gps glonass , sensibility max. -167 Dbm, ipx7 protection class, led-indicator for gps status, operating temperature: -20 c 60 c, power supply: 5 v dc, current consumption: max. 45 Ma, cold start in ca. 26 Seconds, hot start in ca. 1 Second, positioning accuracy: 2.5 M cep circular error probable and 2 m cep with sbas, cable length: ca. 4.5 M, dimensions ø x h without screw thread : ca. 62 Mm x 21 mm, microsoft sensor and location platform website , profit from windows appli...
