All categories
Business & Offices
Electronics & Media
Fashion & Accessories
Groceries & Essentials
Health & Personal Care
Home & Living
Kids & Family
Sports & Outdoors
Search in ZoneOffer
Loading...
Concrete and masonry look tough, but they can hold onto oil, algae, efflorescence and graffiti like a stubborn stain on your favorite shirt. Picking the wrong cleaner can damage the surface, harm plants nearby, or simply waste time and money. That’s why choosing the right product — and buying it from a reliable Danish supplier — makes all the difference when you want lasting results without unintended side effects.
Not all cleaners work the same. Some attack mineral deposits; others dissolve grease; a few lift paint and graffiti. Understanding the main types helps you match the product to the problem and the surface.
Acid-based cleaners, like those containing hydrochloric (muriatic) or phosphoric acid, are effective at removing efflorescence, rust stains and cement smears. They can be powerful, so they’re best for resilient surfaces like poured concrete or coarse masonry. Take care: acids can etch or discolor softer stones and they require neutralization and proper disposal.
Alkaline cleaners dissolve oils and organic grime. These are often used on garages, driveways and workshops. They tend to be gentler on the mineral matrix of concrete than strong acids and work well with hot water or a pressure washer to lift and flush away contaminants.
Biological cleaners use enzymes or microbes to break down organic stains like algae, moss and bird droppings. They’re slower but kinder to plants and drainage systems and are a good choice where environmental impact is a concern.
For graffiti or painted surfaces, there are solvent-based removers and specially formulated gel cleaners that cling to vertical surfaces. Rust removers often contain chelating agents or acids tailored to lift iron stains without attacking the underlying concrete when used properly.
Denmark has a rich DIY and pro-building market. Whether you want a budget-friendly bottle for a one-off job or industrial-strength formulas for contractors, these Danish stores are reliable places to shop.
Silvan is a popular choice for homeowners looking for straightforward solutions. You’ll find a range of degreasers, general-purpose masonry cleaners and accessories like scrubbing brushes and protective gear. Their stores and online shop make it easy to grab a product and ask staff for basic advice on usage and dilution.
Bauhaus offers a broad assortment including more specialist chemical cleaners, pressure washers and surface preparation tools. If you’re working on a larger job or need a stronger product, their range often includes both professional and consumer lines, plus knowledgeable staff who can point you to compatible sealers and finishing products.
For no-fuss purchases on a budget, Harald Nyborg carries affordable degreasers and mechanical cleaners. Their stock is great for smaller jobs and for people who prefer to try a simple solution before committing to pricier professional formulations.
Both Jem & Fix and XL-BYG serve local builders and homeowners across Denmark and typically stock masonry cleaners, rust removers, and concrete-specific detergents. These stores are particularly convenient if you need supplies quickly or want to pair the cleaner with masonry repair materials like fillers and primers.
For contractors or serious renovators, Stark, Bygma and Davidsen supply industrial-grade cleaners and larger-volume packaging. These are ideal if you need product consistency across multiple sites or want technical datasheets for safety and surface compatibility.
When you’re comparing options at Silvan, Bauhaus, Harald Nyborg, or the pro-chains, keep these factors in mind so you don’t end up with a product that can’t solve the problem.
Is it algae, oil, rust or efflorescence? Concrete, brick and natural stone all react differently. For example, acids can harm limestone and some bricks, but they work well on hard concrete. If unsure, test on a hidden patch first.
Look at how concentrated the cleaner is and the treated area per litre. Concentrates can be cheaper per usage, but only if you’re comfortable respecting dilution instructions — too strong and you risk damage; too weak and the stain stays.
Some harsher chemicals require careful disposal and can't be washed straight into storm drains. Danish regulations and local municipal rules might restrict use near watercourses or vegetation. Stores like Stark and Bygma can usually provide safety datasheets if you need them.
Getting a professional result usually means pairing the chemical with the right equipment: a good pressure washer, stiff brushes, extension nozzles and PPE like gloves and eye protection. Bauhaus and Silvan are good one-stop shops for both product and tools.
Here are practical, easy-to-follow approaches you can use right away depending on the stain type.
Apply an enzymatic or biological cleaner as directed, scrub with a stiff broom, and rinse with a pressure washer on a medium setting. Repeat if growth is heavy. Avoid high-pressure settings on older brick or softer stone to prevent surface damage.
Use an alkaline degreaser, allow it to soak in, agitate with a brush, then rinse with hot water if possible. For older stains, multiple treatments or a poultice (absorbent powder plus solvent) may be necessary. If you’re buying a degreaser at Harald Nyborg or XL-BYG, make sure it’s designed for concrete.
Apply an acid-based cleaner diluting exactly as recommended. Work from top to bottom, neutralize afterward (often with baking soda or a specified neutralizer), then rinse thoroughly. This is where protective clothing and eye protection are essential — acids will sting.
Use a chelating rust remover or a specialized rust cleaner. Apply, allow to react, and rinse. For stubborn staining, repeat or consult pro-grade suppliers like Stark who can advise on stronger, controlled options.
Never skimp on safety. Even seemingly mild cleaners can cause skin irritation or damage landscaping and concrete if misused. Wearing gloves, goggles, and long sleeves is standard practice.
Many cleaners need neutralization after use to avoid harming plants and soil. Avoid discharging strong chemical runoff into storm drains. Check product safety sheets — available at pro-chains like Bygma or from product pages online — for disposal guidance and legal compliance.
Cover plants, woodwork and glass with tarps if the cleaner could splash. Use cardboard or plastic sheeting to direct runoff into a safe area for neutralization and disposal to prevent staining or vegetation damage.
Some jobs look simple but can spiral quickly: historic stonework, large commercial areas, deeply set oil, and extensive graffiti removal often need specialist knowledge and equipment. If the surface is valuable (antique brickwork, decorative stone), call a restoration contractor who can use controlled methods to avoid irreversible harm.
Cleaning is half the battle; protecting the surface is the other half. After cleaning and allowing the surface to dry fully, consider applying a breathable sealer (silane/siloxane) to repel water and oils. Many Danish stores carry sealers compatible with concrete and masonry.
Regular sweeping, stopping oil drips quickly, and rinsing algae-prone areas during warm months can reduce the need for harsh cleaners. For driveways and patios, reapply a protective sealer every few years to keep surfaces looking fresh.
Prices vary by volume, concentration and brand. Consumer stores like Silvan and Harald Nyborg often offer good-value packaged solutions for homeowners, while Bauhaus carries a mid-range to high-range selection that includes trusted European brands. Pro suppliers such as Stark and Bygma offer bulk options and technical support, which can be cost-effective for larger jobs. Compare unit prices, check safety datasheets, and ask about return policies if you’re unsure — most large chains have clear guidelines if a product fails to perform.
Before heading to Jem & Fix, Bauhaus, Silvan or any pro supplier, identify the stain type, pick the right chemical family, gather the proper tools and plan safe disposal. A little planning saves time, money and preserves the look and integrity of your concrete and masonry for years to come. And remember: when in doubt, test first on a discreet area or ask staff at pro chains who deal with builders every day.
Ready to tackle that driveway, patio or brick wall? With the right cleaner, tools and a safe approach you’ll be surprised how much better your outdoor surfaces can look — and how long they’ll stay that way.
